Date:         Mon, 3 Jan 2005 17:25:35 -0700
Reply-To:     jimt <camper@TACTICAL-BUS.INFO>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         jimt <camper@TACTICAL-BUS.INFO>
Subject:      Re: Parts wanted:  Sliding door roller
Comments: To: vw4x4@FYI.NET
In-Reply-To:  <41D98D0E.8080906@fyi.net>
Content-type: text/plain; charset="ISO-8859-1"

On 1/3/05 11:21 AM, "Eric Zeno" <vw4x4@FYI.NET> wrote:

> Thanks for your reply.
> 
> I've tryed to get a better definition
> by way of E-mail but as you can imagine
> they haven't gotten back to me after I
> send two pictures last week.
>   And if the lower pulley assembly is what I need for
> $ 2 3 . 0 0     I'll make a new pulley myself.
> And further more at thiese prices we can't aford to
> drive vanagons any more.    And this isn't even a Syncro
> only part!!!!
>                                    Eric
> 
> 
> 
> 
> 
> Don in North Carolina wrote:
> 
>> Eric,
>> 
>> Not sure which roller you need, but Bus Depot has all three:
>> 
>> http://www.busdepot.com/busdepot/view.jsp?model=44&category=43&group=71&prodg
>> roup=1068
>> 
>> 
>> Don in Reidsville, NC
>> 1987 Vanagon GL Syncro (Suzie)
>> 1988 Vanagon GL (Sylvia)
>> 
>> ----- Original Message ----- From: "Eric Zeno" <vw4x4@FYI.NET>
>> To: <vanagon@GERRY.VANAGON.COM>
>> Sent: Mon 03 January 2005 12:54
>> Subject: Parts wanted: Sliding door roller
>> 
>> 
>>>          Syncros sliding door tryed to
>>> get away last night.   Rear roller broke in
>>> two piece.  Axually there are three rollers
>>> at the rear of a 1986 and newer vanagon.
>>> The roller that broke is vertical and
>>> looks like a belt could run in it.  Anyone
>>> have a source for this roller?
>>> 
>>>                                  ERic

Chevy van roller unit is 45 bucks US.  I will stick to the vanagon.

••••••••••••••••••••••••••••••••••••••••
jimt
Planned insanity is best.
Remember that sanity is optional.
http://www.tactical-bus.info (tech info)
http://www.westydriver.com