Date:         Wed, 5 Jan 2005 14:47:52 -0500
Reply-To:     Benny boy <huotb@VIDEOTRON.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Benny boy <huotb@VIDEOTRON.CA>
Subject:      Pulling the engine out or not!! (Head gasket)

Since i replied to many in private...

After a very busy start in the past 3 months (about 9 engine pull / no lift).

About pulling the engine out or not when doing the heads gasket:

First thing to remember, do you have a hydro/electric lift? how about engine
stand, engine crane, big floor lift?
I guess not for most of you guys! Lets say you have one (lift), well how is
the condition of the exaust system? Rusty bolt? I would only do a heads job
if i had a lift and with a very healty exhaust system... even with a very
healthy EX system but no lift it's a pain in the b*** to work under that van
with some heavy parts like the heads, piston, sleeve, exhaust....

Anyway, that is my opinion. With minimal tools an engine is on the bench in
about 4 to 6 hours (2 guys)... then, is so easy to work in and around this
one...

Am pulling out an 85 this weekend, i will take many pictures (i kind of
forgot lately....), especially on the gaskets replacement job by itself
(lower sleeve ring, sleeve/cylinders removal, heads diagnostic, upper head
gasket and rings, torque...) Tools needed, sealant.... i may also do a
piston removal procedure if i have some spare time.

Cheers, Ben
http://www.benplace.com/vw2.htm