Date:         Thu, 6 Jan 2005 21:25:28 -0500
Reply-To:     Eric Zeno <vw4x4@FYI.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Zeno <vw4x4@FYI.NET>
Subject:      Re: CV Joint Packing Grease?
Comments: To: "Bill H." <starfinder88@YAHOO.COM>
In-Reply-To:  <20050107001852.33621.qmail@web53903.mail.yahoo.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII

CV joint grease contains  IIRC moly-disulfide (sP)  Special for
high pressure areas.  This is what came with the joint.  Don't waste your
money or time with anything else.

    BTW there is a place here, right in
the burgh, that you can get the joints, boot, grease, even clamps
cheaper and much better quality, than any place on the WEB.



            Eric                   86-VW4x4
            vw4x4@fyi.net          86-SS Syncro
            Pittsburgh, PA USA     1936-Chrysler
                                   92-Jetta GWC
            www.fyi.net/~vw4x4/vw4x4.htm

On Thu, 6 Jan 2005, Bill H. wrote:

> I got some great suggestion on how to pack the joints but an additional
> suggestion was to use Red Line grease. So far I've been unable to locate Red
> Line in the North Hills of Pittsburgh and an order will take till Monday so
> what likely available grease would be suggested as a second choice? I could
> use the grease that came with the CV/axle unit (EMPI from Bus Depot) but it
> seems to be mystery grease and would like to be sure I'm using good stuff.
> Thanks as usual.
>
> Bill H.
> 88GL
>
>
>
> __________________________________
> Do you Yahoo!?
> Take Yahoo! Mail with you! Get it on your mobile phone.
> http://mobile.yahoo.com/maildemo
>