Date:         Sat, 1 Jan 2005 07:09:37 -0600
Reply-To:     Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Subject:      Re: Stove Repair
Comments: To: Joseph Heil <jose5353@EARTHLINK.NET>
Content-Type: text/plain; charset=iso-8859-1

Most times problems with the burners are just spider eggs or webbs in the
pipes.
Strip the top parts off and try compressed air to get things working again.

Stan Wilder
Engine Ceramics
214-352-4931
www.engineceramics.com
----- Original Message -----
From: "Joseph Heil" <jose5353@EARTHLINK.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, January 01, 2005 3:51 AM
Subject: Stove Repair


> Was wondering if anyone else has had similar issues with stove. Haven't
> been able to find any references for disassembly/repair
> of stove for my 87 Westy.
>
> Basically, one burner works fine, the other is the problem.  It lights
> but just burns on very low flame even if the gas is full on.  I'm
> thinking there might be something in the line but am at a loss as to
> how to take off the burner to get in there.
>
> Any help or advice is much appreciated.
>
> Joe
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.298 / Virus Database: 265.6.7 - Release Date: 12/30/2004
>
>



--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.298 / Virus Database: 265.6.7 - Release Date: 12/30/2004