On the front door handles, there is a small drift pin that holds the "Fork" to the square shaft. If you hold the handle in the installed position, it runs from top to bottom. Remove the pin then insert your key in the lock and slide the cylinder out. Mike
> Hi all > My 84 vanagon handles are looking like bare metal on the top sides so i > pulled the handles and the wiper arms prep them for some trim paint by sem > and wanted > to pull the lock/tumble part. not sure how to get it our of there. on the > early cars you had a screw on it and you could remove everything to and > just pull the > tumbleres. i didnt see a screw, do i just need to look harder or are they > not removable all that easy? thanks Jonce |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.