Date: Sun, 9 Jan 2005 13:43:37 -0500
Reply-To: MilosKitchen <sagmoore@ZOOMINTERNET.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: MilosKitchen <sagmoore@ZOOMINTERNET.NET>
Subject: Re: Van Stuff (Heidelberg OEM installed Radio)
In-Reply-To: <000001c4f670$f696e230$6501a8c0@cbetest12>
Content-Type: text/plain; charset="windows-1250"
Hi Jere,
Unless someone else says differently, my manual says you get 3 tries before
it locks up. You then disconnect the radio, reconnect and try again. After 3
more unsuccessful tries, it supposedly is locked for good. The manual says,
and I quote, "You may try for the last time, another 3 trial and error
processes but on the fourth time, the unit will be definitely inoperative",
(page 5 Note 2, "Sound Choice" Heidelberg CR owner's manual).
I guess it's time for a new radio after that, not that that would be a
tragedy considering the sound quality I get from mine. ;)
Dave Milo
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
Jere Hawn
Sent: Sunday, January 09, 2005 12:31 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Van Stuff (Heidelberg OEM installed Radio)
Milo,
But what if the previous owner gave the wrong number and you try this 3
times and the radio locks up. Is there any way out of this?
Jere
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
MilosKitchen
Sent: Sunday, January 09, 2005 5:16 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Van Stuff (Heidelberg OEM installed Radio)
Good Morning TJ,
With the radio on and the display reading "SAF e", press both the "AM/FM"
button and the "Scan" button for more than 3 seconds. "SAF e" will disappear
and you will see 1000 displayed. Using the square station preset buttons,
tap in the code number by repeatedly pressing the corresponding station
preset button, i.e. 1 push for 1, 7 pushes for 7. You can go back and forth
till you get it right as long as you don't dawdle too much. When the code is
correct, depress both the "AM/FM" and "Scan" buttons for more than 3 seconds
and you should have the FM band displaying 87.9, and you are good.
Hope this helps,
Dave Milo
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
TJ Hemrick
Sent: Sunday, January 09, 2005 6:21 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Van Stuff
Stop the power discussion or take it to a power list. I'm here for
VANAGON info!
Rant over.
OK, I started looking at list messages around 0600 EST. Does that mean
I have some sort of disease???
Anyone know which buttons to push so I can enter the code into my
factory radio and get rid of the SAFE message? The PO thoughtfully
wrote the code in several places in the factory manual but lost the
radio manual. I'm out in my 88 pushing buttons hoping I'll hit the
right combo.
Thanks
TJ
__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 1/6/2005
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 1/6/2005
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 1/6/2005
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 1/6/2005
