Date:         Sun, 9 Jan 2005 18:02:27 -0500
Reply-To:     Edward Maglott <emaglott@BUNCOMBE.MAIN.NC.US>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward Maglott <emaglott@BUNCOMBE.MAIN.NC.US>
Subject:      Re: FS: Ebay: Vanagon Hatch Holder
In-Reply-To:  <001001c4f660$9c7a71a0$647ba8c0@MAIN>
Content-Type: text/plain; charset="us-ascii"; format=flowed

Oh yes, almost anyone can make one.  And you can find exactly how to do it
with a breeze through the archives here.  How's that for sharing?  The
thing is, it took me about 2 years to get around to doing it.  But consider
the cost of the materials, and the fact you have to buy 8' of pipe to get a
few inches worth.  and then the time to find the specifications in the
archives, cut the right size, paint it, paint it again.  Even at minimum
wage, it starts looking cheap for a couple $, delivered to your door.

Edward
http://snipurl.com/bvoq


At 10:33 AM 1/9/2005, you wrote:
>In explaining the thing in detail you made it clear that any bonehead can
>pick up a piece of pvc or whatever next time he's in Home Depot and make on
>for himself. Thanks for sharing. : )
>Aside from that, I hope you have liability insurance. I had this vision of
>some poor sap getting brained when one of those things slips, and then
>catching one in the back for good measure after he falls to his knees.
>
>Good luck,
>Robert