Date: Sun, 9 Jan 2005 23:36:59 -0400
Reply-To: Ron Cunningham <ronc@PERNIX.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Ron Cunningham <ronc@PERNIX.COM>
Subject: Re: Dual Mass Flywheels and I5 dimensions needed (AEL)
In-Reply-To: <AIEFIGCNNANNIHLNFBPEOECEOPAA.mailinglist@fastforward.ca>
Content-Type: text/plain; charset="iso-8859-1"
Answers to questions 4 & 5 require the engine to be mounted. Answers to
questions 1, 2 & 3 require the engine to be un-mounted. I have an unmounted
AEL engine, so I can provide answers to the first three questions, but not
the last two. It will require a trip to my shop, I can do this tomorrow. Are
you able to share any details of how you got your AEL conversion running?
RonC
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of David Marshall
Sent: 09 January 2005 22:46
To: vanagon@gerry.vanagon.com
Subject: Dual Mass Flywheels and I5 dimensions needed.
I spent a few hours just tinkering in the shop today. I have an 115hp ATJ
engine code TDI that is from a B5 Passat with it's transmission. The engine
will eventually find it's way into my Syncro Westfalia, but I want to
experiment with it a bit first. Some of the things I want to try is to use
the dual mass flywheel that came with engine, but, as Murphy would have it,
it isn't going to be easy. One thing I did notice is that the transmission
will bolt to an I4 and an I5 engine!
Seeing how this was designed to go into a place where an I5 can sit, I have
a few questions for the group.
1 On the I5 motors, what is the distance from the block straight out to
where starter teeth on the flywheel begins?
2 What is the diameter of the I5 flywheel?
3 What is the distance form the block to the "flat" area where you would
push on the clutch fingers with the throw out bearing?
4 What angle from the horizontal is an I5 motor in the back of a Vanagon?
5 What is the distance between the two motor mount "pins" that go into
the cross member?
David Marshall
Fast Forward Automotive Inc.
4356 Quesnel-Hixon Road
Quesnel BC Canada V2J 6Z3
Internet: www.fastforward.ca Email: sales@fastforward.ca
Phone: (250) 992 7775 FAX: (250) 992 1160
- Vanagon Engine Conversions and Accessories
- Vanagon, Transporter and Iltis Sales and Importation
- Electrical harness fabrication and customization
Due to the large volume of email we receive, PLEASE include previous
emails when responding.
This will allow us to read the complete dialogue in one message and will
result in quicker and more accurate responses.