I have a recurring tranny problem. It seems that no matter what I do, I have to take it back out more often than I would like. I purchased a rebuilt tranny back in November. The tranny growled going into second gear, and ocassionally into 3rd and 4th. So I pulled it out and my tranny guy swapped out the synchronizers (got the good German ones this time). Put the tranny back in, filled it with Redline MT-90, have driven it about 4,000 miles since then. It still growls going into second, sometimes into third, and sometimes into fourth. My shifter linkage is new from end to end. I have adjusted the linkage via Bently over and over, and have had some of my buddies help and double-check my adjustments. My clutch is relative new (13,000 miles) and I have bled my clutch slave cylinder. The clutch appears to be releasing just fine. I have noticed that when I shift to third and release the clutch, the shifter moves to the rear by an inch or so. There is no movement in any other gear. My motor mounts are new. The tranny mount is not broken or cracked that I can see. Is this movement within the tranny itself? If so, what is going on here? Thanks for your help! Warren Lail 88 Westy "Billy Bones" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.