You sure got that right about the skill level required to weld anything with TIG. I burned up plenty of high price tungstens and cups before I ever got a level of skill built that made it cheaper to do my own TIG welding. Stan Wilder Engine Ceramics 214-352-4931 www.engineceramics.com ----- Original Message ----- From: "George Goff" <THX0001@AOL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, January 19, 2005 8:21 AM Subject: Re: Head treatment for pitting--flattening technique
> In a message dated 1/18/05 3:50:45 PM, vwdormer@HOTMAIL.COM writes: > > << While on this, since I just did this what would be the best way to fill > with > Aluminum MIG or TIG? >> > > TIG because it requires a welder who knows how to weld. Done right, it's > also a prettier weld. > > George > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.6.13 - Release Date: 1/16/2005 > >
-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.13 - Release Date: 1/16/2005 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.