Maybe a new part? Lower Idle Stabilizer Bearing? Sounds like someone was playing with the vacuum system for some reason. Is there normally any kind of restrictor on that hose? When I did my conversion from AC to Subie I had to create a restrictor on my cannister line. A wooden bead with a small hole drilled through it. jimt
On 1/19/05 2:56 PM, "Robert Keezer" <warmerwagen@YAHOO.COM> wrote: > HAs anyone ever found a CV joint ball bearing in the > bottom hose of a WBX 2.1 idle stabilizer hose? > > You know, the little hose that comes out of the bottom > of the idle stabilzer and plugs into the intake > manifold? It also has a vacuum stub. > > Well, I found a CV joint bearing in the hose . > No wonder this would'nt idle. > > Any ideas on why it was there? > > Now to go see if it will run. > > Robert > > 1989 Wolfsburg |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.