Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2005, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 26 Jan 2005 20:51:13 -0500
Reply-To:     AAG - Larry Word <word_aag@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         AAG - Larry Word <word_aag@COMCAST.NET>
Subject:      excessive tire wear on outside while turning
Content-Type: text/plain; charset="iso-8859-1"

RE: (1) radius rod bushings; (2) anti-roll bushings; (3) control arm bushings and its assoc. parts, etc

Problem: excessive tire wear on outside while turning.....

-How hard are these parts to fix? -Can I do this stuff with my "normal" tools? -Who is best supplier of said parts? -Parts I am referring to (1) radius rod bushings; (2) anti-roll bushings; (3) track control arm and its assoc. parts, etc.

all that stuff I didn't want to disturb the original time I went thru. vehicle 80-100K miles ago.

Larry Georgia

----- Original Message ----- From: "Dennis Haynes" <dhaynes@optonline.net> To: "'AAG - Larry Word'" <word_aag@COMCAST.NET>; <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, January 26, 2005 7:33 PM Subject: RE: Old vanagon steering parts - radius rod

> If your radius rod bushings are original, they are shot. Most cases of > unexplained tire waer and poor handling can be traced here. If these > bushings allow the rod to move under load, the Caster adjustment will > constantly change. As the caster difference changes from side to > side,(cross caster angle) the van will pull to one side or tire wear > will become excessive while turning. These bushings also have an inner > guide bushing. If worn or rusted, the rod will destroy the mounting > hole. If bad enough, welding repair may be required. > > Dennis > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf > Of AAG - Larry Word > Sent: Wednesday, January 26, 2005 12:28 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Old vanagon steering parts - radius rod > > Hello group: > > Tonight's the night for all my ?'s. Bear with me as I cannot afford a > mechanic so I guess > I'm it..... > > All my old vanagon steering rubber parts are cracking but how relative > is dry-rotting issues for > these steering parts and/or equivalent parts on our front ends: > -radius rod (inner and outer) rubber parts > -anti-roll bar bushings > -track control arm and its assoc. parts...talking rubber only > here.... > -etc. > > Also...what is expected life on front end parts (tie rods, balljoints, > etc.) considering their pre-lubed and cannot be lubed easily again? > > Larry > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.