Zoltan, From what I have learned on this list, this modification is intended to smooth out the signal from the AFM when small imperfections in the carbon track cause erratic signals. Have you taken the plastic cover off of the AFM? Maybe there are some major gouges in the track that the pigtail device can not compensate for. I have successfully been able to slide the track over so the wiper has a fresh surface. Ken Lewis http://neksiwel.20m.com/ ----- Original Message ----- From: "Zoltan" <zolo@FOXINTERNET.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, January 30, 2005 2:14 AM Subject: [VANAGON] BUcking despite of ...
I have installed that famous solution to the vanagon syndrome, that eight inch long piece of cable with some electronic things inside that fits to the AFM. It still does some bucking. Just started. I filled up with new gas but that did not help either. What to do? Zoltan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.