Date:         Sun, 30 Jan 2005 17:32:14 +0000
Reply-To:     mtbiker62@COMCAST.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob Stevens <mtbiker62@COMCAST.NET>
Subject:      Re: Pop-Top canvas job....

The only "right-angle" mode, AFAIK, is the hand-held end, where the battery is. Mine is a Black & Decker, and at least that helps it fit into the corners a little better but you still wind up with raw knuckles at the end of the day :)
And, again, thanks John for your great help ... and the entertainment. What a great work shop you have!

Don't forget to take the upper bed cushions off to get a better shot at those little-bitty screws. :)

How's the van coming along?

bob

-------------- Original message --------------

> Yeah, commensurate with ya on that one buddy !!!
> I found, for me anyway that it was just easier,
> to bite the bullet, & have a couple of buddy's
> help me lift the top off.
> Set it upside down on a couple of saw horses
> And do that half that way.
> As for the bottom, Bob Stevens showed me the way to do it easier.
> With a small, battery powered phillips screw driver.
> a life saver.
> Do they make them in a right angle model?
> Still 6 or 8 hours...
> John C.
> SLC, UT 85 Westyru...