Volks, Could use any advice on my current problem (among others!). For some reason, I'm not getting power to the ECU. '88 Carat, Digifant, with some jury-rigging done to the wiring in the engine compartment. Only have Start signal from ECU. no Pwr. According to the Bentley, power should come from the ignition switch. Swapped out ign. switch with a known good one, no good. All fuses in box are OK, and wiring up front looks good. Installed an ECU set up with DigiTool, no power-up. Starter turns over, but no fuel pump! Any advice appreciated! Thanks, Doug in CT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.