Date:         Mon, 7 Feb 2005 07:23:13 -0600
Reply-To:     Tim Marciniak <tmarciniak@WI.RR.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tim Marciniak <tmarciniak@WI.RR.COM>
Subject:      Cleaning bad grounds
Content-Type: text/plain; charset=US-ASCII; format=flowed

Having had some starting and idle problems with my van I am going
through and cleaning all the ground connections in the van.  Does
anyone have a sure fire method for cleaning the threaded bolt holes
were the ground screws go in.  I tried rolling up some emery cloth and
just turing that in the hole but i cant see that that works very well.
maybe running a threading tap might help but then there is the risk of
crossing threads.  Any got any other methods.

Tim
1990 Multivan

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.