Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2005, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 14 Feb 2005 10:59:27 EST
Reply-To:     JordanVw@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         JordanVw@AOL.COM
Subject:      Re: vanagon Steel coolant line pipe patching
Comments: To: swright@ZUIKO.SLS.BC.CA
Comments: cc: ctonline@webtv.net
Content-Type: text/plain; charset="US-ASCII"

In a message dated 2/13/05 11:51:22 PM Eastern Standard Time, swright@ZUIKO.SLS.BC.CA writes:

> Subj:Steel coolant line patching > Date:2/13/05 11:51:22 PM Eastern Standard Time > From:swright@ZUIKO.SLS.BC.CA > To:vanagon@GERRY.VANAGON.COM > Sent from the Internet > > > > While wresting with the tranny fill plug (82 Diesel Westy), I managed to > disturb the metal coolant pipes enough to start a leak. I noticed they were > wet before, and had them on my list of things to check, but at the rate it > is > now dripping, they just moved up the list! > It appears the O.D of the steel pipe is about 1.25", so I'm looking for > 1.25" > I.D. coolant hose I assume. The leak is at the low point just behind the > rear > frame cross member. I was considering replacing about 2 feet of each > pipe, which includes where they bend around the crossmember. Is there a > concern of the hoses collapsing at his point? Should I consider finding a > 1.25" hose with a bend in it perhaps? It looks like I should be able to make > a sweeping bend I think. > Is it necessary to make a flange on the end of the steel pipe to hold the > hose? > > Thanks. > > -- > Shawn Wright > I.T. Manager > Shawnigan Lake School >

why re-invent the wheel? i bought the Stainess Steel replacement repair sections from Terry Kay a few yrs ago..TK makes them for this very purpose to splice into the rusted sections of metal coolant pipes on the 81-85 wbx and diesel vanagons. . they are pre cut, preformed mandrel bent and come with SS hoseclamps and vibration buffers and HD tiewraps. im pleased with them.. very high quality SS piping, tho i would reccomend welding on a bead at the perimeter of each pipe end to hold the hoseclamps. i CC'd this to TK, so check the headers for his email addy.(ctonline@webtv.net)

no affiliation, just a happy customer. chris


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.