Date:         Tue, 8 Feb 2005 11:59:17 -0800
Reply-To:     Dave Chameides <docproteus@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dave Chameides <docproteus@EARTHLINK.NET>
Subject:      Keyed 12 v source
Content-Type: text/plain; charset="ISO-8859-1"

I am wiring in a 12v heater and I need the relay to get itıs 12volt signal
(this will trip the relay, not power the heater) from a source that is only
on when the engine is running (ie. Once the alternator is cranking).
Ideally Iıd like to tap into something in the little electrical box in the
rear engine compartment.  Wondering if anyone has any thoughts on the best
place to tap into?

Dave

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.