Date:         Tue, 15 Feb 2005 00:06:43 -0500
Reply-To:     Benny boy <huotb@VIDEOTRON.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Benny boy <huotb@VIDEOTRON.CA>
Subject:      Re: Secret of the Exhaust Nuts?
Comments: To: Chris Stann <mrpolak@YAHOO.COM>

Interesting post....

http://www.benplace.com/head3/100_0007.jpg

It's an operation...you need a PH.D...he he he

Like someone said, propane torch, not to hot, just perfect...2 minutes per
bolt, but before, remove all rust with a ice-pick or a screwdriver and a
hammer... now, test a 12mm (with rust removed, the 13mm is now smaller) or
even a 11mm, most of the time the 12 is just perfect.... tap the 12 socket
just to see if it fit..now, heat that bolt surrounding... when hot, tap the
12mm in hard... remove the bolt.

Cheers.
http://www.benplace.com/vw2.htm

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.