One white wire is for the ECU and the other is for the ICU. Both are needed. Page 97.105-(track 21) ECU and Temp11 page 97.107-(track 38) ICU Mark Philip Chidlaw wrote: >Thanks George. I had occasion today to make the 2-hour drive to town (Santa >Rosa) for domestic provisions, and stopped in at just such a parts place - >Smothers Parts - where I found just what I needed. Actually they found it >after 5 minutes of searching through a catalog. > >This one came pre-wired with 2 leads. In the van, it looks like 3 wires >attach to the 2 contacts in the connector, with the 2 white wires on 1 side >and the brown on the other. At least 1 must go to the ecu. Can anyone direct >me to the Bentley wiring diagram covering this? -Phil > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.