Tim, Are you sure your stock steel rims are ET38? All my steel Vanagon rims are ET30.
BenT
On Sun, 6 Mar 2005 07:21:16 -0800, TJ Hannink <tjhannink@yahoo.com> wrote: > On Sat, 5 Mar 2005 15:12:25 -0800, mark drillock wrote: > > > VW did not make the 14x6 alloys with a different ET than the 14x5.5 > > steels to keep the rims from rubbing. They did it to keep the wider > > tires from rubbing. > > I happened to be rotating the tires and checking the front-end alignment on Goldibox this morning and decided to do some checking. I bolted on a stock steel 14" wheel (less tire) 5.5" wide with 38mm of offset to the front right hub and measured the clearance between the inner edge of the wheel and the spindle and found 20/64" or 8mm of clearance. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.