In a message dated 3/7/05 8:13:36 AM Eastern Standard Time, jonathan_dearman@hotmail.com writes:
> I recently bought a new passenger door seal for my 91 Westy. Upon > removing my old seal I noticed that VW had used an adhesive to keep > the old seal in place. So instead of asking this post first I was in > a hurry and used contact cement on the door and seal and attemped to > put them together. It was a nightmare! the seal is staying in there > but I know it's not seated correctly and the door is difficult to > close. So my question is what type of adhesive is used to put door > seals on, and if there is any special technique? 3M weatherstrip adhesive. avaiable at any FLAPS chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.