Date: Sat, 5 Mar 2005 11:00:52 -0800
Reply-To: Robert Keezer <warmerwagen@YAHOO.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Robert Keezer <warmerwagen@YAHOO.COM>
Subject: Re: "intermittant syndrome" harness fix...only for 2.1L
vans???
In-Reply-To: 6667
Content-Type: text/plain; charset=us-ascii
The "Vanagon syndrome" is not limited to the Vanagon
Digifant. The Digifant 2 Golf-Jetta from 1988 to 1992
has the same problem.
Before I switched my fuel injection over to Motronic
('95 Golf engine) I had the Digifant 2 fuel injection
which is similar to Vanagon Digifant.
I had the bucking and stalling condition all the way
from Kansas to the east coast and back to the NW.
It was a bad AFM .
I got the capacitor harness from a 16 valve
Jetta and another good used AFM. I never had another
problem for 4 years until my plug wires went bad and I
thought it was the AFM.
SO I upgraded my engine to Motronic when I really
did'nt have to, but Motronic run the engine with more
power so it was worth it.
I don't know of any Digijet AFM problem cases.
Having bad spark plug wires can cause similar bucking,
cutting out and stalling symptoms.
If you have carbon fiber wires these are prone to
crack internally and leak.That's what I dioscovered I
had wrong after I switched to Motronic.
The stalling did'nt go away until I replaced the plug
wires with new copper core.
Robert
1982 Westfalia
--- Ken Lewis <kdlewis_wasting_time@ACCESS4LESS.NET>
wrote:
> Chris,
> Refering to Bentley pages 24.28 and 24.57 the pinout
> of the two AFMs seems
> to be the same so I do not see why it would not
> work.
> Ken Lewis
> http://neksiwel.20m.com/
> ----- Original Message -----
> From: <JordanVw@AOL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Friday, March 04, 2005 2:32 PM
> Subject: [VANAGON] "intermittant syndrome" harness
> fix...only for 2.1L
> vans???
>
>
> > i just bought the little 8" long factory harness
> fix for the vanagon
> > "intermittant syncrome" problem.. its the little
> harness with the a plug
> on each end,
> > plugs into your harness and then into your AFM..
> the part number is# 025
> 906
> > 302A
> >
> > i was told this would would work on my '84
> vanagon...1.9L
> > but i just talked to ken and he said its only for
> the 2.1L vans..
> > when i posted this up to the list a week or so ago
> i couldnt get a
> straight
> > answer but i was led to believe it would work on
> my '84..
> >
> > so what is the real answer? will the # 025 906
> 302A harness work on a
> 1.9L???
> > i was hoping this would work so i didnt have to
> solder in a capacitor..
> >
> > did i just buy something that i cant use?
> >
> > chris
> >
>
__________________________________
Celebrate Yahoo!'s 10th Birthday!
Yahoo! Netrospective: 100 Moments of the Web
http://birthday.yahoo.com/netrospective/