Date:         Sun, 6 Mar 2005 17:03:47 EST
Reply-To:     JordanVw@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         JordanVw@AOL.COM
Subject:      Re: [syncro.org] Wheel offset
Comments: To: vwdormer@HOTMAIL.COM
Content-Type: text/plain; charset="US-ASCII"

In a message dated 3/6/05 3:16:23 PM Eastern Standard Time,
vwdormer@HOTMAIL.COM writes:


> Diameter 15, Width 7, 45mm offset, Bolt Pattern 5 X 112mm, Audi A4 1.8T
>
> Does all this mean that I can't run these Audi A4 wheels on my 85 2WD GL?
> With Spacers?
>
>

yes you can.. ive done it plenty of times.  you need spacers, and youll need
to machine the center hub hole of the wheel.   i just sent you pics of Audi
wheels on my van.   as far as how to- please check the archives..this gets
discussed at least once a month.

chris

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.