In a message dated 3/11/05 2:35:49 PM, manikmike@YAHOO.COM writes: << who had the replacement elec. connector ends that fit the Temp2 sensor? >> First try your local auto parts house or FI specialist because you will know immediately if their goodies will work. If not, then the following might do the trick: http://store.summitracing.com/partdetail.asp?part=MSD%2D2400 The downside with any of these type of connectors is that, while they will give you a terminal as good as the factory's, you HAVE to use the PROPER crimp tool. George |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.