Date:         Fri, 11 Mar 2005 22:23:55 -0800
Reply-To:     Damon Campbell <damoncampbellvw@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
Comments:     DomainKeys? See http://antispam.yahoo.com/domainkeys
From:         Damon Campbell <damoncampbellvw@YAHOO.COM>
Subject:      Re: loss of power at certain rpm
Comments: To: jimt <camper@TACTICAL-BUS.INFO>
In-Reply-To:  6667
Content-Type: text/plain; charset=us-ascii

Wouldn't the AFM be more load dependent?  To the AFM,
it doesn't know (or care) what the RPM is, just how
much power the engine is putting out...

Now if that 100rpm range was different at 1/2 throttle
or 3/4 or full... that would be more AFM related (or
at least so it seems to me).

Hall sender/distributor should be the only
RPM-specific sensing thing in the engine.  After that,
the ECU reacts to that input.

-Damon

--- jimt <camper@TACTICAL-BUS.INFO> wrote:
>
> Take another look at that AFM.  What you are
> describing puts it at about the
> same position in the AFM.  It is about the only
> thing of the engine that
> would have a failure in such a range.

'84 Westy "The Van" w/2.3L WBX
Vancouver, BC



__________________________________
Do you Yahoo!?
Make Yahoo! your home page
http://www.yahoo.com/r/hs