Date:         Wed, 9 Mar 2005 10:58:53 -0700
Reply-To:     jbrush@AROS.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Anonymous Digest <jbrush@AROS.NET>
Subject:      CV Tool Part Number for Archives

I was cleaning up and found the receipt for the Napa parts I bought to fit
the tri-star bolt heads on the CV joints, and thought I would post them
and get them into the archives if anyone should need them.

The NAPA part number for the tool is 2304, $6.80, and the adapter I got to
got to a 3/8 drive handle is 35741 @ $5.99

Probably didn't need the adapter, as a 5/16 socket should work, but I
bought it anyway. Just be sure to use some duct tape or something to  hold
the tool in the adapter so it doesn't pull out at the worst possible time.
:-)

John

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.