In a message dated 15/03/2005 1:52:18 PM Eastern Standard Time, LISTSERV@GERRY.VANAGON.COM writes: Do the CV bolts require lock washers? Locktite?
Yes, lock washers are needed. They are a special flat serrated type used only on the CV bolts between bolt head and the support plate. Do not use any locktite on the threads. Proper torque and proper lock washers are all that's needed to keep them from coming loose.
Cheers, Frank Condelli Almonte, Ontario, Canada _BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm) a VW Camper camping event, Almonte, ON, June 09 ~ 12, 2005 '87 Westy, '90 Carat & Lionel Trains Member: _Vanagon List_ (http://www.vanagon.com/) , _LiMBO_ (http://www.bcn.net/~limbo/) , _IWCCC_ (http://www.westfalia.qc.ca/) & _CCVWC_ (http://www.ccvwc.ca/) Vanagon/Vanagon Westfalia Service in the Ottawa Valley _STEBRO/Vanagon Stainless Steel Mufflers_ (http://members.aol.com/Fkc43/stebro.htm) _Frank Condelli & Associates_ (http://members.aol.com/Fkc43/busindex.html) or http://frankcondelli.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.