Tom, There is a pin holding the actuator rod to the transmission, remove it and the actuator will come off. The pin is under the rubber boot about midway between the actuator and the trans. case. The boot looks like it is one piece, but it seperates into sections to allow you access to the pin. Mark in AK 87Westy Syncro ----- Original Message ----- From: "Tom L. Salicos" <TomSalicos@COMCAST.NET> Date: Sunday, March 20, 2005 6:20 pm Subject: Syncro Diff Lock Actuator Removal > I have finally removed my Syncro's tranny and am getting it ready > to ship to AA in Tacoma. The diff lock actuator doesn't want to > come off. I have pulled off the housing and released the lock > ring, but nothing wants to unscrew or pull out. > > What's the magic here? > > Tom Salicos > '97 Westy Syncro > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.