In a message dated 3/18/05 5:35:42 PM Eastern Standard Time, ryang@LONDON.COM writes:
> > I've concluded that the time has come to replace all of the wires running > through the > driver's door (windows, speaker, locks, and mirrors). Close to 200K miles > of opening > and closing have weakened them to the point where only one still works. > > I'm looking for two things here, any BTDT advice and any suggestions for > materials > to use to protect the new wires for the future (other than the stock rubber > boot). > > I assume that I will have to remove the dash to do this right, so any tips > there would > be helpful as well. > > why replace all the wires??? just solder the broken joints where they go thru the door. chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.