Date: Mon, 21 Mar 2005 23:02:29 +1200
Reply-To: Andrew Grebneff <andrew.grebneff@STONEBOW.OTAGO.AC.NZ>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Andrew Grebneff <andrew.grebneff@STONEBOW.OTAGO.AC.NZ>
Subject: Re: Neat Stuff MVC (Mucho Vanagon Content)
In-Reply-To: <004a01c52d9b$7db853a0$6601a8c0@badmonkey>
Content-type: text/plain; format=flowed; charset=iso-8859-1
>That's agreat site. I have been trying to get someone to import that
>"Tankdeckel" that locks for me, for two years. Anyone have any idea who
>might do this?
Buy one from Jens Hansen in germany. I have one on the way now.
<Jens.Hansen@Hansen-Motorsport.de>
Our little discussion about these:
>actually i was talking about the AERO400 fillercap.
OK. The website shows a key in the Zero400, but
the Aero400 looks like it has a flip-out finger
latch.
>Well the weld-in adaptor has to be welded into the body panel. Correct.
As my van's paint is original and only needs a
shine-up, I think the bolt-in adaptor is the one.
>For our adaptor you don't have to drill holes into the panel. Our
>adaptor slips into the opening and is held by another ring that holds
>the the outer ring. The filler slips into the outer ring and is screwed
>to that. So, no modification has to be made to the body.
>But you will have to modify the filler tube, that leads to the tank.
>This tube has to be shortend a bit, because the filler neck and the
SAMCO knee is a little bit longer than the originel filler.
>we offer the Newton fillercaps that are used on several helicopters,
>small aircrafts, racingcars (e.g. DTM), and on some Ferraries and
>Lamborghinis and other super sports cars.
>For these fillercaps we have 2 different mounting solution:
>
>1: a "weld in" adaptor
>2: an adaptor ring that allows the mounting at the car without modifiing
>the chassis.
>
>To mount the fillercap to the filler tube of the T3 it is neccesary to
>use a rubber filler neck. these are connected with a samco knee. Some
>modifications have to be made to the filler tube to fit the hole system.
>
>It Replaces the entire filler opening.
>
>Prices are:
>Filler Cap with lock 75,00 Euro
>Filler neck, rubber 27,00 Euro
>SAMCO 45° knee 25,00 Euro
>
>Adaptor ring, "weld in" 22,00 Euro
>Adaptor ring, without welding 45,00 Euro
Prices as at 13-10-04.
--
Andrew Grebneff
Dunedin
New Zealand
Fossil preparator
<andrew.grebneff@stonebow.otago.ac.nz>
Seashell, Macintosh, VW/Toyota van nut
HUMANITY: THE ULTIMATE VON NEUMANN MACHINE
DEMOCRACY: RULE BY THE LOWEST COMMON DENOMINATOR