Date:         Wed, 16 Mar 2005 06:13:38 EST
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: Starter spins, engine doesn't
Comments: cc: Greg@POTTSFAMILY.CA
Content-Type: text/plain; charset="US-ASCII"

In a message dated 16/03/2005 12:10:26 AM Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

I  recently bought a 1988 Vanagon GL automatic which the PO told me had
a  seized engine. It's parked at my Dad's place... this morning he was
having  a look at it and decided to try turning the key. The starter
engages and  turns the flywheel, but the engine does not turn over.

Is this  potentially a simple problem with the flex plate, starter, TC
or flywheel;  or is it more likely that the PO is correct and the engine
is toast?   I might be able to spare some time to look at it over easter
weekend and  was wondering what I should tackle first.



Greg, that's the very common broken flex  plate problem.  Those flex plates
are the same on all Bus/Vanagon auto  trannys.  They are NLA at the dealer so
get looking for a good used  one.  No, I do not have one at this time.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 09 ~ 12, 2005
'87 Westy, '90 Carat &  Lionel Trains
Member: _Vanagon List_ (http://www.vanagon.com/) , _LiMBO_
(http://www.bcn.net/~limbo/) , _IWCCC_ (http://www.westfalia.qc.ca/)  & _CCVWC_
(http://www.ccvwc.ca/)
Vanagon/Vanagon Westfalia Service in  the Ottawa Valley
_STEBRO/Vanagon Stainless Steel  Mufflers_
(http://members.aol.com/Fkc43/stebro.htm)
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
or  http://frankcondelli.com