Date:         Wed, 16 Mar 2005 09:49:49 -0700
Reply-To:     jbrush@AROS.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Anonymous Digest <jbrush@AROS.NET>
Subject:      Re: CVs and bolts and washers,  oh my
Comments: To: Frank Condelli <RAlanen@AOL.COM>
In-Reply-To:  <1a5.333f9158.2f696be9@aol.com>

>Do the  CV bolts require lock washers? Locktite?


>Yes, lock washers are needed.  They are a  special flat serrated type
>used only on the CV bolts between bolt head and the  support plate.  Do
>not use any locktite on the threads.  Proper torque  and proper lock
>washers are all that's needed to keep them from coming  loose.

So these are dealer only items? On-line vendors,  FLAPS?

Since none of my CVs have them attached, I don't really even know what
they look like.

Thanks for the input.

John

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.