Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2005, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 16 Mar 2005 20:02:39 -0600
Reply-To:     Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Subject:      Re: I win!!! the worse ever "westy part" picture...
Comments: To: Dennis <guskersthecat@YAHOO.COM>
Content-Type: text/plain; charset="iso-8859-1"

Seems you took my statement wrong. I simply meant that Black Satin is a Thermal Barrier and should not be used on engine cases, it is an exhaust coating. The *TLTD* THERMAL DISPERSANT is what you'd use on engine cases, valve covers, pushrod tubes. It's also a black coating but more of a semi gloss when cured. I use it on motorcycle finned cylinders, Porsche finned cylinders and other areas that benefit from thermal dispersant.

Stan Wilder Engine Ceramics 214-352-4931 www.engineceramics.com

----- Original Message ----- From: "Dennis" <guskersthecat@YAHOO.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, March 16, 2005 7:26 PM Subject: Re: I win!!! the worse ever "westy part" picture...

> Stan, frankly I'm a little puzzled with your response. I spoke with the > tech folks at techline before I bought and applied that product. After, > following their technical advice, I was completely happy with the results. > I'm guessing you are aware that Black Satin (retail) can be optionally > baked...the exhaust heat seems to have done the job quite fine. > > It is well known in the performance community that retaining exhaust gas > temperature increases gas velocity. The purpose of ceramic coating an > exhaust, other than cosmetics and corrosion control, is specifically to > keep heat in, not to disperse it. What you are suggesting is in direct > contradiction of the relationship of volumetric efficiency to temperature. > > Applying the product you suggested to an exhaust would increase engine bay > heat and reduce exhaust gas velocity...both things you want to avoid:-) > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.7.2 - Release Date: 3/11/2005 > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.