Date: Wed, 23 Mar 2005 13:13:00 -0800
Reply-To: Leon <korkwood@WSHOST.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Leon <korkwood@WSHOST.NET>
Subject: Re: audi wheels on vanagon,
In-Reply-To: <4241BEB5.4070108@comcast.net>
Content-Type: text/plain; format=flowed; charset=iso-8859-15
Doubt you will find anyone running test lab testing all Audi wheels
to destruction just so that very few of us will know how they performed
Don't know about "stress risers" either...
On a daily driver you could put motorcycle wheels(doubt you will)
where it counts is driving on dirt, offroad etc.
have been driving on dirt, washboards etc last 5 years using Audi 5000T
alloys
with centers opened to 2.5" dia hole
suspension bottomed out many times.Wheels? Indestructible!!!!!
$100 for a set of 4 at PYP.
Leon
On Wed, 23 Mar 2005 11:08:37 -0800, Marc Sayer <marcsayer@COMCAST.NET>
wrote:
> JordanVw@AOL.COM wrote:
>
>> like i said before..if youre mounting these on a 2wd then the
>> centerbore hub
>> holes must be machined to 2.5" dia, and spacers MAY need to be used up
>> front
>> depending on the offsets (audi wheels had different offsets, ranging
>> from
>> 35-45)
>
>
> Bet the Audi Quattro rallye cars don't do this to their wheels. :-)
>
> Anyone ever tested to destruction a set of Audi wheels before and after
> these mods to see how this affects their strength? There is not a lot of
> meat between the bolt holes and the centerbore to start with on some of
> these wheels. I would be very leery of reducing the amount of material
> there. I would also be leery of creating stress risers by simply
> grinding/machining on the wheel. I would want to do something to address
> that issue too, especially on a daily driver where the wheel is exposed
> to constantly changing loads over a long period of time.
>
> I have seen alloy wheels break from just this sort of modification on a
> race car.
>
> Also have to wonder how the spacer and longer studs/bolts change the
> loading applied to the wheel, especially in light of the machining that
> must be done to the centerbore.
>
> Just some things to think about. A marginal part works great, until it
> doesn't. Past success with modified parts does not necessarily predict
> future performance or suitability. Especially if the modifications are
> not standardized and uniform.
>
> --
> Marc Sayer
> Journalist, Photographer, Dog Trainer (APDT member #062956)
> Director of Operations & Training - Deaf Dane Rescue Inc.
> Springfield, OR USA
>
> My Homepage - http://gracieland.org
>
> Deaf Dane Rescue Homepage - http://gracieland.org/DaneRescue/
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.8.0 - Release Date: 3/21/05
>
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
|