As Chris suggests. I have some pictures of this that I did on my westy. <http://homepage.mac.com/kimbrennan/PhotoAlbum8.html>
On Mar 29, 2005, at 1:24 PM, JordanVw@AOL.COM wrote: > In a message dated 3/29/05 9:28:58 AM Eastern Standard Time, > felder@KNOLOGY.NET writes: > > >> Can anybody provide insight into the procedure for fitting this setup >> to my westy? Is asking if you have to pull the westy innards like >> asking if you have to pull the engine to replace a rear seal? >> >> > > drill up thru dummy plastic filler bolts under floor, then use a > radial arm > saw and set the blade to cut thru your plywood floor for tacks which > will be > recessed in the cuts. mount tracks and then cut a strip of wood to > lay in them > when seat is not in use, and recover with floor mat. > > chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.