Benny boy wrote: >I have no more comments than this one.... >http://www.benplace.com/fuel_line.htm > > > Ben, Thanks for the link to your instructions. That's very helpful. I have a few questions though. 1. Did you replace the injectors or just clean them? 2. If you cleaned them, how did you do that? They look very shiny. :^) 3. There seems to be something on the new smaller O-rings. Is that petroleum jelly or what? 4. I'm assuming that doing the passenger side injectors is harder as they seem to be harder to get to. Are there any tricks to making that job easier, like removing something else to get to them? Thanks again for the great resource. Marc Perdue |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.