Input shaft roller bearing? Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of jimt Sent: Friday, April 01, 2005 4:49 PM To: vanagon@GERRY.VANAGON.COM Subject: Transmission experts? My strange almost but not quite a grinding noise is back again. Not CV related. Is almost impossible to hear underneath the van but is very evident from inside the van. Goes away with clutch in. Does not appear to be rpm dependant. Get about the same vibration rate as the sound if I hold the shifter hard over to make contact with base. Is very evident when first accelerating or decelerating and then disappears. Have some suspicions but they donΉt make sense. Any suggestions appreciated. jimt Planned insanity is best. Remember that sanity is optional. http://www.tactical-bus.info (tech info) http://www.westydriver.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.