|
I cleaned and adjusted the one on my '84 back in '94 and it's still working fine. I replaced the little light bulbs and the strip that covers the slot while I was in there. I used an Allen wrench to remove the "T" handle ... lifted the carpet around the shifter housing just enough to remove the 4 screws that hold it down and raised the housing off the shifter. Just remember that there are wires with push on connectors therein. You probably wouldn't have to remove it completely to do what you have to do ... but remember I replaced the cover strip, too. Mike
Roger Sisler wrote: > Maybe try wiggeling the shifter while turning the key.Try starting it in > neutral and wiggeling the shifter while turning the key.If these have any > effect , then its probably a simple adjustment on you neutral start > switch.Roger > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.