Hi, I'm putting together my first 1.9 engine and have a few questions. a>There are two oil pump gaskets in my gasket kit. Bentley shows only one on page 17.7. Do I put one gasket between the block and oil pump housing and the other between the oil pump housing and the oil pump cover? What kind of sealant is best to use here? b>Bentley says to use new SEALING NUTS on the oil pump. It this what most people do? Or can you just re-seal them with RTV or similar? -Don |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.