The extra plug is for the center locking indicator on the dash. If you install a de-coupler, the wiring is there for the light. Dennis. -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Tom L. Salicos Sent: Friday, April 15, 2005 12:57 AM To: vanagon@GERRY.VANAGON.COM Subject: Syncro Wiring Question I've taken out my gas tank, along with the engine and tranny, as part of a Subie conversion project. On the driver side, by the charcoal cannister, I now find there are two identical 2 pin female connectors where the level sensor plugs in. I can't figure out why there are two in this area. One is obviously for the float output, but what else plugs in there? Thanks for help. Tom Salicos '87 Westy Syncro |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.