Date:         Fri, 15 Apr 2005 06:02:44 -0400
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: Syncro Wiring Question
Comments: To: "Tom L. Salicos" <TomSalicos@COMCAST.NET>
In-Reply-To:  <001e01c54177$9e694560$a5b2ab43@omar>
Content-type: text/plain; charset=us-ascii

The extra plug is for the center locking indicator on the dash. If you
install a de-coupler, the wiring is there for the light.

Dennis.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Tom L. Salicos
Sent: Friday, April 15, 2005 12:57 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Syncro Wiring Question

I've taken out my gas tank, along with the engine and tranny, as part of a
Subie conversion project.   On the driver side, by the charcoal cannister, I
now find there are two identical 2 pin female connectors where the level
sensor plugs in.  I can't figure out why there are two in this area.  One is
obviously for the float output, but what else plugs in there?

Thanks for help.

Tom Salicos
'87 Westy Syncro