Date:         Mon, 18 Apr 2005 13:49:07 -0500
Reply-To:     Alan Watts <alan@DATAX.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alan Watts <alan@DATAX.COM>
Subject:      Re: catalytic converter failure question - Bentley Error
Content-Type: TEXT/PLAIN; charset=US-ASCII

hi all,

In my previous email, I stated "the idle stabilizer on the oxygen sensor
wasn't connected" when in fact, it was the actual oxygen sensor connector.
On Bentley 24.53, in figure 24-175, this connector is mislabeled.  I was
referring to this diagram when diagnosing my problem.  As it turns out,
reconnecting the oxygen sensor was to blame for my catalytic converter
failure.  I replaced it along with the cat and all is well now...

thanks to everyone for all their help.

Alan

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.