Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2005, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 15 Apr 2005 11:06:49 -0400
Reply-To:     Sam Walters <sam.cooks@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Sam Walters <sam.cooks@VERIZON.NET>
Subject:      Re: Difference between Sachs, Luk HD, Luk Premium?
Comments: To: Conrad Klahn <conradk@MAC.COM>
In-Reply-To:  <61be44865f75236f41201873ae1a958e@mac.com>
Content-type: text/plain; charset=ISO-8859-1; format=flowed

Conrad,

I once looked at the different clutch discs while at the location of VanAgain.com. The more expensive definitely is thicker and more substantial. But the cheaper one works just fine and last for lots of miles for people. I made the decision for my old 84 based on projected time and distance of use. I knew that Van had a limited life expectancy with me due to all of its problems so I went with the cheaper one and it was still working fine when the van was stripped last fall.

If I thought I was going to keep a particular van for at least 50k miles, I would put in the heavy duty clutch.

I found that the clutch in my Syncro which is supposed to be the HD (I didn't buy it) is easier to push down than the stock one that was in my 84 and the replacement. The clutch in my 85 is more like the Syncro. I don't think one needs tree trunk legs to push any of them. From my experience, the HD has to do with the build of clutch plate, not the effort required to push the pedal.

Regarding the $80 difference, many think it is. Most of the cost of a clutch job is $$ for labor or your time for labor. If the HD clutch lasts 30% longer, it is probably worth it if you intend to keep the van for a long time.

Usually, not always, the failure of the master or slave is gradual and you notice some softness in the pedal for a few days before it gets to the point where it won't work. So if the pedal starts having to be pushed closer to the floor to disengage the clutch and engages closer to the floor, fluid is leaking somewhere and you had better check the master and the slave and the brakes also. I have always gotten some warning (about 5-6 slave failures in 20 years), but ignored it / procrastinated a day or two a few times and twice came out to find the van's clutch inoperable the next morning. Now I pay quick attention to the soft clutch pedal. (Or hope I will have learned my lesson.)

-- Sam Walters Baltimore, MD

89 Syncro GL 85 Westy Weekender

All incoming and outgoing email scanned by automatically updated copy of Norton AntiVirus.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.