Date:         Thu, 21 Apr 2005 08:39:37 -0400
Reply-To:     John Stepto <john.stepto@KVPNEUMATICS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Stepto <john.stepto@KVPNEUMATICS.COM>
Organization: KV Pneumatics, Inc.
Subject:      Re: curtain rod parts
In-Reply-To:  <m2107/13/04M03.CCDED141B03@irresistable.xo.com>
Content-Type: text/plain; charset="us-ascii"

If someone has a sample, broken or otherwise, I could draw it in
Solidworks and look into having it rapid prototyped it the
SinterStation, we have one in England, for making parts in glass-filled
nylon.  Is there a left and right?

John Stepto

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Automatic digest processor
Sent: Thursday, April 21, 2005 12:00 AM
To: Recipients of vanagon digests
Subject: vanagon Digest - 20 Apr 2005 (#2005-322)


There is one message totalling 24 lines in this issue.

Topics of the day:

  1. making obsolete plastic parts.? Re: '80-'84 westy plastic pass
Curtain
     ro...

----------------------------------------------------------------------

Date:    Wed, 20 Apr 2005 23:58:01 EDT
From:    Jeff Oxroad <Oxroad@AOL.COM>
Subject: Re: making obsolete plastic parts.? Re: '80-'84 westy plastic
pass
         Curtain ro...

Sorry to post a partial repeat of may last post, but just so you know,
I'm in for a curtain rod cover if you guys figure out a limited run.
Thanks.

Best,
Jeff
83.5 Westy
LA,CA

In a message dated 4/20/2005 8:29:29 PM Pacific Standard Time,
JordanVw@AOL.COM writes:

how many  people would be interested in one, if they were $35 ea new?
the cost  will covers time and materials and john's fee..

------------------------------

End of vanagon Digest - 20 Apr 2005 (#2005-322)
***********************************************