Thanks for you're comments and advices Denis.... I have been there before and will go there again.... Regards, Ben Dennis Haynes wrote: >Valve adjustment is fine. The whole idea of hydraulic lifters is to take >out critical adjustment. If lifters keep clacking, you have a valve >sticking in the guide or a bad lifter or they are not getting oil flow. >As for the temp 2 sensor, they rarely go bad but the connection at the >plug, the ground connections, including the one in the FI harness is >frequently an issue. As for the NGK O2 sensor, I find they are often >weak or slow to respond and the Vanagon does not like it. Even Bosch, I >find 1 or 2 out of 4 are no good. Also, the NGK is the wrong diameter to >accept the clip on deflector shield. The shield keeps air from cooling >the sensor off and road spray from fouling it. > >Dennis > > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.