This is a little late but I figured I'd share just in case someone is in need. To make an exact copy of a small obsolete plastic part you simply take a master part and cover it with a release agent and then cast material around it. Once the material is cured you cut it open and remove the master part and are left with a perfect cavity. You then fill the empty cavity with whatever material you want your part to be and let it cure. (I'm leaving out many of the little details since this has been discussed before. Also, this is for a single piece mold, many parts would require a two piece "clam shell" type mold.) Picture #1: The parts to the left are the originals/masters (top is handmade using existing parts, the bottom is a SLA). The parts on the right are cast copies. http://files.photojerk.com/t3/rapidmolding_1.JPG Picture #2: The cast mold will pick up the finest details which in return show up in the parts cast in the mold. It's a poor photo. http://files.photojerk.com/t3/rapidmolding_2.JPG This method is a great way to cheaply (relatively speaking) make duplicates of parts once you've done it a few times. Look out for air bubbles. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.