Date:         Mon, 25 Apr 2005 16:22:25 -0230
Reply-To:     Keith Pike <kappy@NL.ROGERS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Keith Pike <kappy@NL.ROGERS.COM>
Subject:      Re: '88 westy water temp light  flashing..... what to check  first
Comments: To: Mike Collum <collum@VERIZON.NET>
Content-Type: text/plain; charset="iso-8859-1"

    It is  9 C and  windy outside  so I did the  'quick check'  and
disconnected the  sensor and reconected it........sure 'nuf  works  fine now
Thanks  to all.
    Keith
    88 Westy

  ----- Original Message -----
  From: "Mike Collum" <collum@VERIZON.NET>
  To: <vanagon@GERRY.VANAGON.COM>
  Sent: Sunday, April 24, 2005 8:43 PM
  Subject: Re: '88 westy water temp light flashing..... what to check first


  The sender in the expansion tank.

  I've had this happen due to corrosion at the contacts where the wires
  connect to the sender, too.  Clean that connection well first.

  Mike


  Keith Pike wrote:
  > Just  fired   up the  bomb and  the  water temp light  stays on
blinking;
  > heaters  work and  o/f tank is  up. what to check next?
  > TIA
  > Keith, NL
  > Canada
  >
  >
  > --------------------------------------------------------------------------------
  >


--------------------------------------------------------------------------------