Date:         Sat, 30 Apr 2005 06:07:57 EDT
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: WTB: bad Idle Control Unit
Comments: cc: hfinn@INGRATES.NET
Content-Type: text/plain; charset="US-ASCII"

In a message dated 29/04/2005 3:27:20 PM Eastern Daylight Time,
LISTSERV@GERRY.VANAGON.COM writes:

Looking  for a couple BROKEN idle control modules for a reverse engineering
project.  Investigating the feasibility of replacing it with a simple
microcontroller  based work-alike. Willing to pay postage plus some money
for your  trouble.



John, I have five dead ones sitting in front  of me.  Plan was to rebuild
them someday but far too many other exciting  projects on the go.  You can have
one or two for the cost of shipping,  probably about 10 bucks.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 09 ~ 12, 2005
'87 Westy, '90 Carat &  Lionel Trains
Member: _Vanagon List_ (http://www.vanagon.com/) , _LiMBO_
(http://www.bcn.net/~limbo/) , _IWCCC_ (http://www.westfalia.qc.ca/)  & _CCVWC_
(http://www.ccvwc.ca/)
Vanagon/Vanagon Westfalia Service in  the Ottawa Valley
_STEBRO/Vanagon Stainless Steel  Mufflers_
(http://members.aol.com/Fkc43/stebro.htm)
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
or  http://frankcondelli.com