My alternator belt was replaced recently. The tension is ok on the belt. However since the replacement, the alternator light and Oxy light turn on when the RPM goes below 1500 RPM and turn off when RPM is above 1500 RPM. I didn't have time yet to check if the voltage is still 13.8 volts at the battery when it is happening. Could it be the brushes on the alternator? Any idea why it is happening after the belt was replaced? Germain |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.